top of page

How to Read Charts in Numerical Reasoning Tests: A Practical Guide

2 hours ago
4 min read

Charts compress a lot of information into a small space. Numerical reasoning questions ask you to turn that information into a specific answer: a difference, an average, a proportion or a percentage change. The arithmetic is often straightforward. Identifying the correct numbers is what makes the task difficult.


This guide explains a reliable method for reading bar charts, line graphs and data tables, with worked questions you can practise independently.


A five-step method for reading any chart

  1. Read the question before calculating. Look for the quantity, comparison and period being requested.

  2. Check the axes, legend and units. A scale marked “£000” means a displayed value of 150 represents £150,000. A vertical axis that starts above zero can visually exaggerate differences.

  3. Select only the relevant figures. Cross-check the category, colour and time period; don't mix a 2025 value with a 2026 total.

  4. Choose the right operation. Is the question asking for the absolute difference, an average, a share of a whole or a percentage change?

  5. Sense-check the answer. Is the unit correct? Is the direction of the change plausible? Does the result fit the scale of the original figures?


Useful distinction: An increase of £20,000 is an absolute change. Moving from £100,000 to £120,000 is a 20% increase. They answer different questions.


Worked example: comparing regional revenue

Imagine a chart displaying annual revenue for three regions. Figures are in £000.


Grouped bar chart of fictional 2025 and 2026 revenue (£000): North 125 and 150, South 80 and 92, West 60 and 78.

Region

2025 (£000)

2026 (£000)

North

125

150

South

80

92

West

60

78


Question 1: Which region recorded the largest percentage increase?

Use the starting value (2025) as the denominator:


Percentage increase = (New value − Old value) ÷ Old value × 100


  • North: (150 − 125) ÷ 125 × 100 = 20%.

  • South: (92 − 80) ÷ 80 × 100 = 15%.

  • West: (78 − 60) ÷ 60 × 100 = 30%.


Answer: West, with a 30% increase. North delivered the largest absolute increase (£25,000), but West grew by the largest percentage. This distinction is a common source of errors.


Question 2: What was the combined revenue in 2026?

150 + 92 + 78 = 320 in £000 units.


Answer: £320,000. Do not report “£320” simply because the chart shows 320.


Question 3: What was North's share of total 2026 revenue?

North's revenue = 150; total = 320.


150 ÷ 320 × 100 = 46.875%, or 46.9% to one decimal place.


Answer: approximately 46.9%. If multiple-choice options are given, round only after completing the calculation.


Reading different chart formats

Bar and column charts

Check whether the bars show one period, several periods or stacked categories. In a grouped chart, read the legend before comparing colours. In a stacked chart, the whole column is the total and each segment is a component: a segment's upper boundary is not automatically its value.


Line graphs

Line graphs emphasise change over time. Check whether the question asks for the value at a point, the change between points or the highest/lowest period. A steep-looking line does not automatically imply a large percentage rise: the axis scale matters.


Tables presented alongside charts

A chart may illustrate a trend while a table provides precise values. Prefer the exact table figures for calculations where they are supplied. If a chart's values are approximate, do not invent precision from the drawing.


Three mistakes to avoid

Using the final value as the base for growth. An increase from 80 to 100 is 20 ÷ 80 = 25%, not 20 ÷ 100 = 20%.


Confusing percentage points with percentages. A rate moving from 20% to 25% rises by 5 percentage points, which is a 25% relative increase.


Ignoring units or rounding too early. A question expressed in £000 may require conversion to pounds. Keep intermediate values sufficiently precise, then round to the instruction given.


Try it yourself

A fictional business records the following quarterly orders:


Quarter

Number of orders

Q1

240

Q2

300

Q3

270

Q4

360


Practice A: By what percentage did orders increase from Q1 to Q2? Practice B: What was the average number of orders per quarter? Practice C: What fraction of the annual orders occurred in Q4, expressed as a percentage to one decimal place?


Answers and workings

A — 25%: (300 − 240) ÷ 240 × 100 = 25%. B — 292.5 orders: (240 + 300 + 270 + 360) ÷ 4 = 1,170 ÷ 4 = 292.5. This is an average across the four quarters, not a whole-quarter order count. C — 30.8%: 360 ÷ 1,170 × 100 = 30.769…%, rounded to 30.8%.


A simple practice routine

Start untimed. For each question, write down the units, the two or three required figures and the formula before calculating. Once the method becomes familiar, introduce a time limit and review mistakes by category: wrong numbers, wrong formula, unit conversion or rounding. That is more useful than simply repeating questions faster.


Practise the reasoning, not just the answer

SS Solutions is being developed as a Mac-based numerical reasoning practice companion, with a focused iPhone display for suggested results and key workings. It is currently a private beta, and AI-generated answers can be wrong. Use it with permitted practice material and check the working independently.



Practice guide from Set Sail Solutions Ltd. Examples are original fictional exercises, not questions taken from a testing provider. External assistance is not appropriate in assessments that prohibit it.

Comments


bottom of page